Wolfeye Keylogger
  • Home
  • Tutorial
  • FAQ
  • Android
  • Contact

Keylogger articles.

How to install a Keylogger

3/22/2020

0 Comments

 
In this article you will learn how installation works for the most important and best keyloggers on the market. We have tested a lot of keyloggers and these are the best to choose from.

We will show the installation process for the best and most important keyloggers:

Ardamax Keylogger ( https://www.ardamax.com/ )
Refog Keylogger ( https://www.refog.com/ )
SpyAgent ( https://www.spytech-web.com/spyagent.shtml )
Spytector ( https://www.spytector.com/index.html )
Revealer Keylogger ( https://www.logixoft.com/ )
Wolfeye Keylogger ( https://www.wolfeye.us/ )
 
How to install Revealer Keylogger

In this section you will learn the steps to install Revealer Keylogger on your Computer. Revealer Keylogger is one of the keyloggers that we have tested and therefore can recommend. The official website where you can download the application is https://www.logixoft.com/ .
Before downloading the program your will need to temporarily turn off any antivirus or antimalware program. Revealer Keylogger – as all Keyloggers presented on this website – is completely save to use. However, some antivirus software can raise a flag, because it is a keylogger and keyloggers are considered as potentially unwanted programs by antivirus software. Here is how to temporarily turn off Windows Defender, the build-in Windows antivirus software:

1. Open the Windows Defender Security Center
Bild
2. Click Virus and thread protection
Bild
3. Click Virus and Thread protection settings
Bild
4. Turn off the real-time protection
Bild
Windows Defender is now disabled. Next you can download Revealer Keylogger. Open the Email that was sent to you after purchase and click the download link.
Bild
The Download is from mega.nz:
Bild
When the file is downloaded, click on it. Next double-klick on the setup file and click run:
Bild
Then enter the password 123:
Bild
Click install now:
Bild
Copy and paste your product key in the field that appears:
Bild
This is the mentioned field, then click continue:
Bild
Revealer Keylogger is now installed on your computer.
Bild
As a last step, Revealer Keylogger should be added to the exclusion list of your antivirus software to avoid detection:
Bild
Revealer Keylogger automatically adds to the exclusion list of Windows Defender.
Bild
If this is the only antivirus you have there is nothing else to do. You can now turn on the antivirus protection and start monitoring with Revealer Keylogger.
Bild
How to install Spector Keylogger

In this section you will learn how to install Spector Keylogger, another good keylogger to choose from. You can download the Keylogger from the official website on https://www.spytector.com/ .

Before downloading the program your will also need to temporarily turn off any antivirus or antimalware program – as was the case with Revealer Keylogger and as is the case with all keylogers. Again: antivirus software can raise a flag, because it is a keylogger and keyloggers are considered as potentially unwanted programs by antivirus software. That is why you should first take into account the steps that were written about antivirus settings adjustments for the Revealer Keylogger.

There are many of customizations that can be  done on the top menu. This can improve the keylogger accuracy and potential, but also makes it more complex. On the main settings you can change the interface language and also password protect the program:
Bild
On Basic settings you can configure the keylogger file name and icon:
Bild
On Email settings and FTP settings you can configure the keylogger to send the logs to your email and FTP accounts:
Bild
Bild
On the module settings you can tweak Spytector Keylogger even further offering a lot of adjustments and settings to choose from: It can be configured to display a warning message when running (show message) or to automatically uninstall itself. And you can configure an uninstall hotkey. Even more Spytector can be configured to restrict the access to specified websites and applications.
Bild
On Logs options you can configure a filter and the keylogger will be active only for specified websites/programs.
Bild
Finally the configuration is set up. Now you must build the server file clicking build module button. All settings will be appended to the built server. The saved server is the actual spy software. You must double-click/run the built server/module on the computer you want to monitor and the monitoring will start.

How to install SpyAgent Keylogger

In this section you will learn how to install SpyAgent Keylogger, another good keylogger to choose from. You can download the Keylogger from the official website https://www.spytech-web.com/ .

Before installing SpyAgent you again may need to take some preparatory steps to get your computer ready for its installation: the adjustments in the antivirus settings. You can again read the section in Revealer Keylogger in which you learn how to adjust the Windows Defender antivirus to define the exception. Here it should again be described some words on how to make these antivirus adjustments. Also with SpyAgent you must take into account some more things:

First, if you have any antivirus or antispyware software installed you must disable it temporarily. Any auto-protect or real-time scanning features should be turned off at this time. When you are done installing SpyAgent you will be able to exclude SpyAgent's files from your antivirus's scanning.

Second
, if you are on Windows Vista or Windows 7, 8 or 10 or higher you may have to disable the UAC feature that Windows uses if it is enabled.

Third
, ensure you are installing under an account with Administrator access. In Windows Vista or Windows 7, 8, 10 or higher you can right click on the SpyAgent installation file you downloaded and choose the 'Run as Administrator' command to ensure this if you are not sure if your user account is an administrator or not. This is not necessary for other Keyloggers, but in the case of SpyAgent you must do that unfortunately.
 
Turning off and on the UAC feature

Step 1:
To access the UAC settings "UAC" (no quotes) into your Start button's "Search programs and files" box, or Control Panel search box. Click the "Change User Account Control settings" link that appears.
Bild
Step 2:
In the User Account Control Settings screen drag the slider down to "Never notify" and click OK. Accept any confirmation prompts to continue.
Bild
Step 3:
Reboot your computer.
 
Installing SpyAgent Keylogger

After downloading your copy of SpyAgent navigate to where you downloaded (in this case it is on the Windows desktop). Double click the SpyAgent installer file to start the SpyAgent install.
Bild
Then click through the installer until you come to this screen. This is where you choose the folder location for SpyAgent's install. Youcan  change this from the default (c:\program files\sysconfig\ or c:\program files (x86)\sysconfig\ if on a 64-bit computer.) to the path below, or something of your own making. Once you configure the Destination Directory, click the Next button.
Bild
Next click through the installer until you come to this screen. This is where you choose the install type for SpyAgent. If you want SpyAgent to not appear in the start menu and install the bare minimum files then choose the Stealth installation, as shown below. Click Next when you have done so.
Bild
When you are done configuring the install you will be asked if you want to include an uninstaller. For total stealth choose NO - as shown.
Bild
After your install completes you will now have to configure and run SpyAgent! Go to the START button on your desktop and click it once to bring up the Start menu. Choose the RUN... option to get the below window. You will have to enter your installation path (this is the same path from the installer that you just entered!) When you have entered it press OK.
After your install completes you will now have to configure and run SpyAgent! Go to the START button on your desktop and click it once to bring up the Start menu. Choose the RUN... option to get the below window. You will have to enter your installation path (this is the same path from the installer that you just entered!) When you have entered it press OK.
You can now run SpyAgent by double clicking the application file. You will be prompted to configure your password - do so. Once inside SpyAgent click on the 'GENERAL' button on the right side of the SpyAgent window. The below window will appear - enable the options exactly as you see in the below window.
After you configure the General options you can click the LOGGING OPTIONS section and configure the logging options as well. When you are done click OK to save your settings.
Bild
Almost done! Now all that is left to do is click the Start Monitoring button that is highlighted below. You will be prompted for your password - enter it, and click OK. You will receive a notification message on how to bring SpyAgent out of stealth mode to later view logs - read this message carefully!
 
Now SpyAgent is in total stealth. When you restart your PC it will run invisibly as well. To stop stealth mode run the nostealth.exe in the SpyAgent installation directory, or press CONTROL+SHIFT+ALT+M on your keyboard to bring up the password window.
Bild
How to install Refog Keylogger

In this section you will learn how to install Refog Keylogger, another good keylogger to choose from. You can download the Keylogger from the official website https://www.refog.com/ .

As with all keyloggers you will have to adjust antivirus settings: read the section in the previous keyloggers to adjust antivirus.
After downloading the application from the official website you can run it. First you will have to select your language:
Bild
Bild
Then you must agree the license agreement:
Bild
After that you will have to select the installation path:
Bild
If you need a desktop shortcut (the program will be visible to others), check the corresponding box and click Next:
Bild
Wait until the program is installed.
Bild
Open the program to view monitoring data: press the CTRL + ALT + SHIFT + K key combination:
Bild
The program is ready to work.
Bild
Do you want to configure the program to send the collected data to your email address? See below:
Bild
Bild
Bild
Check the box to configure the email delivery of monitoring data.
Bild
Bild
Bild
Change the hotkey combination:
Bild
The installation has been completed!

How to install Ardamax Keylogger


In this section you will learn how to install Ardamax Keylogger, another good keylogger to choose from. You can download the Keylogger from the official website https://www.ardamax.com/ .

Before the download you will again have to adjust antivirus settings. You can read in the sections before how that is done.
Right after you install and run Ardamax Keylogger, it starts monitoring your computer. It adds an icon to the System Tray. Right-click the icon to access the options. You will see the menu.
Bild
Bild
How to install Wolfeye Keylogger

In this section you will learn how to install Wolfeye Keylogger, another good keylogger to choose from. You can download the Keylogger at https://www.wolfeye.us/ . The installation process is much faster in comparison to the other keyloggers.
With the Wolfeye Keylogger, it is sufficient to first select or create the folder in which Wolfeye Keylogger is to be downloaded or run before the download. This folder must then be placed in the antivirus exceptions.
 
It is sufficient to put only this folder in the antivirus exception. Because Wolfeye Keylogger does not copy itself anywhere. The software stays in the folder where it resides and just creates a folder named "data" where various files are copied.

In the next step Wolfeye Keylogger can be downloaded. The Software should be saved / downloaded into the folder that was previously set in the exceptions of the antivirus. The downloaded file is a .ZIP file, which now has to be unpacked in the next step. This is done by pressing the right mouse -> Extract all (see picture to the right). You will then be prompted to enter a password to unzip the .ZIP file. The password is wolfeyekeylogger.
Bild
The installation process is now complete. Wolfeye Keylogger can now be started by running the file wolfeye.exe and can be used in spite of antivirus program. By running the application, the controll window will open. Choose your spy settings by checking the feature boxes: choose If you want the software to run on windows startup, or if you want the keystrokes to be recorded and/or to record screenshots. Set the screenshot interval and select if you want the recorded data to be send to your email adress.
 
Start the program by clicking the “start” button once you defined the desired settings in the control window. To make sure that the program is invisible, you simply need to close the application by clicking on the red Windows “X” in the upper right corner. The Software will continue to run hidden in the background!
Bild
Conclusion

All here presented Keyloggers a good options for monitoring a computer. In this article we showed the installation process for the various programs. In generall the installation takes only a few clicks. But: An antivirus adjustment has to be set for all Keyloggers. But after having set that exclusion, you will only need a few clicks for installation. The fastest and most easiest Keylogger to install is Wolfeye Keylogger.
0 Comments



Leave a Reply.

Powered by Create your own unique website with customizable templates.
  • Home
  • Tutorial
  • FAQ
  • Android
  • Contact